Measuring Microscopes

Measuring Microscopes Series PEAK 2008

All Series 2008 measuring microscopes are focused by the coaxial rotation of the barrel. Versions with enlargements of 25 x, 50 x, 75 x and 100 x are available. The ocular can be focused to the scale, which in contrast to the Series 2034 is not built into the ocular. The measuring scale is separately fitted above the cylinder in a receptacle. The measuring scale can be easily changed by unscrewing the top of the barrel. Since the scale can be rotated within the microscope, you do not have to revolve the whole instrument during the measuring process. In addition two other templates are available. These can be used for measuring angle designations as well as making simple length measurements. No exchangeable objectives are available for the measuring microscopes. A small, practical transport box protects the precise instrument, which only weighs 83 grams, against damage. The clear acrylic base and the cup of the eyepiece can be ordered as spare parts. We also offer a lamp as an important accessory. This makes it easier to measure on dark surfaces and under poor illumination conditions. Two 1.5-volt mignon batteries power the instrument. The acrylic base has to be screwed off to fit the lighting unit. The lamp is then inserted from above, and locks into a mounting groove. The broad base of the unit also increases the stability of the combined unit of microscope and lamp

Type	Magnification	Scale Length	Field of view	Scale
2008-25	25x	3,0 mm	3,3 mm	0,05 mm
2008-50	50x	1,6 mm	2,0 mm	0,02 mm
2008-75	75x	1,0 mm	1,1 mm	0,01 mm
2008-100	100x	0,8 mm	0,84 mm	0,005 mm

An optional illumination set 2008-LH is available.

Measuring Microscope Series PEAK 2009

è to top

The Shop Microscope is widely used as a universal measurer. Despite its small-sized and lightweight mechanism, it has very useful devices for practical efficiency. For example, its rack and pinion focusing makes operation very simple and smooth. Furthermore, observation in dark places is possible because it is attached with an illumination device using one penlight battery. Also, it has built-in precision scales for measuring. With the above-mentioned advantages, the Shop Microscope is useful in a large number of fields, including surface inspections, centering, blade inspection, measuring diameters of small holes, inspecting plates and printed matter, measuring meshes of textiles, inspecting yarn, inspecting skins, observation of slides, and in the electronics field

Type	Magnification	Scale Length	Field of view	Scale
2009-20	20x	6,0 mm	7,2 mm	0,05 mm
2009-40	40x	3,4 mm	4,3 mm	0,02 mm
2009-60	60x	1,6 mm	2,2 mm	0,02 mm
2009-100	100x	1,2 mm	1,8 mm	0,01 mm

PEAK 2010 Brinnel-Microscope

è to top

The Peak Brinnel Microscope was especially designed to measure the impression of the Brinnel hardness meter.
This 20x magnification microscope is conveniently portable and has universal magnification inspection features. Scales are available in metric or imperial
It is being utilized on a wide range like the Peak Shop Microscope

Magnification: 20x

Scale steps: 5/100 mm (25/10000")

Field of view: 7,2 mm

Scale length: 6,0 mm

Measuring Microscope PEAK 2034

è to top

The standard microscope is characterised by its easy and straightforward use. Simply place the microscope over the area to be inspected, focus – and you’re ready. Thanks to the transparent acrylic foot the surface to be checked is visible from all sides, thus facilitating the location of the area to be measured. Focusing is carried out by turning the barrel coaxially. Due to the short path within the microscope, the image of the object appears inverted.
Objectives with 2x to 30x magnification are available for the standard microscope. The measuring scales for each respective magnification (objective) in the eyepiece can be exchanged. If it is necessary to change the scale frequently, we recommend changing the whole eyepiece to ensure that this is carried out quickly, safely and cleanly. However, if additional objectives are used only for visual checks then no extra eyepieces are required.
Illumination from the side permits measurement on dark surfaces or in dark rooms. Two 1.5 volt mignon batteries are required. The microscope is supplied in a padded transport box, providing safe transport space for a further four objectives which are available as accessories.
The MKH stand ensures that the microscopes of the 2034 series always stand absolutely securely. For inspection tasks on rollers, this stand is an absolute must. And, of course, when working with a digital camera, the MKH stand is simply indispensable. With the aid of adapter rings between the eyepiece of the microscope and the objective of the digital camera, it is possible to take a picture. Via an adapter cable between the camera and computer interface the image can be viewed on the screen of a computer. With our METOCHECK measurement software, comprehensive inspections and detailed documentation can be carried out on the spot.

Threaded Base: Pitch = 1mm, Diameter = 41mm

Type	Magnification	Scale Length	Field of view	Scale
2034-20	20x	6,0 mm	7,2 mm	0,1 mm
2034-40	40x	3,0 mm	3,6 mm	0,05 mm
2034-60	60x	2,0 mm	2,4 mm	0,02 mm
2034-100	100x	1,2 mm	1,45mm	0,01 mm
2034-150	150x	0,9 mm	0,96mm	0,005 mm
2034-200	200x	0,6 mm	0,72mm	0,002 mm
2034-300	300x	0,2 mm	0,48mm	0,001 mm

Wide range of accessories is available. è to top

Measuring Microscope PEAK 2054 / 2054 EIM

è to top

The microscopes of series 2054 is available as Standard- or EIM-Version (right reading feature)

The advantage of this series over the 2034 microscope series is the right reading feature. An additional prism reverses the path inside the microscope. The right reading image of the area to be checked facilitates the location of faults. Particularly the inspection of paintwork in the automobile industry is much easier with the 2054-EIM series of microscopes. For work on continuous production lines the possibility to focus quickly with a knob, rack and pinion assembly is particularly advantageous.
The standard sturdy aluminium foot ensures a safe, secure stand. An acrylic foot is available as an option for better visibility of the inspection area.
The advantages of right reading image have, however, the disadvantage that the luminosity of the objective is reduced. Therefore, in addition to the standard illumination, we offer a more powerful version with Mag-Lite and adapter.
Objectives 2x, 4x, 6x and 10x are available for all microscopes of the 2054-EIM series
For work on delicate painted surfaces we recommend the stable MKH stand. Its rollers are covered with a silicon-free, soft plastic tubing which protects your materials from scratches. For inspecting rollers of all kinds the MKH is a must. With the aid of adapter rings between the eyepiece of the microscope and the objective of the digital camera, it is possible to photograph the image. When using a digital camera the MKH stand is an absolute must to ensure a safe and stable stand. Via an adapter cable between the camera and computer interface the image can be viewed on the screen of a computer. With our METOCECK measurement software, comprehensive inspections and detailed documentation can be carried out on site

Type	Magnification	Scale Length	Field of view	Scale
2054-20	20x	6,0 mm	7,2 mm	0,1 mm
2054-40	40x	3,0 mm	3,6 mm	0,05 mm
2054-60	60x	2,0 mm	2,4 mm	0,02 mm
2054-100	100x	1,2 mm	1,45mm	0,01 mm
2054-150	150x	0,9 mm	0,96mm	0,005 mm
2054-200	200x	0,6 mm	0,72mm	0,002 mm
2054-300	300x	0,2 mm	0,48mm	0,001 mm

2054-20-EIM	20x	6,0 mm	7,2 mm	0,1 mm
2054-40-EIM	40x	3,0 mm	3,6 mm	0,05 mm
2054-60-EIM	60x	2,0 mm	2,4 mm	0,02 mm
2054-100-EIM	100x	1,2 mm	1,45mm	0,01 mm

Measuring Microscope PEAK 2054 CIL

è to top

The measuring microscopes of the 2054-CIL series are equipped as a standard with coaxial illumination from the side. The advantages of coaxial illumination are illustrated by the application examples shown on this page. Surface structures, particularly those on chrome or other reflective materials, are often not easy to inspect with illumination lateral. The 2054-CIL with standard foot is available for 40x magnification and up. Combined with the MST stand the 2x objective is also possible. For work on rollers, the microscope needs to be used with the MST stand. The additional side lighting facilitates, for instance, the inspection and measurement of dots in prints. The use of a digital camera is possible just as much as the subsequent upgrading of equipment with a CCD camera.
Power is supplied to the coaxial illumination by a small battery box containing two 1.5V mignon batteries

Type	Magnification	Scale Length	Field of view	Scale
2054-40CIL	40x	3,0 mm	3,6 mm	0,05 mm
2054-60CIL	60x	2,0 mm	2,4 mm	0,02 mm
2054-100CIL	100x	1,2 mm	1,45mm	0,01 mm
2054-150CIL	150x	0,9 mm	0,96mm	0,005 mm
2054-200CIL	200x	0,6 mm	0,72mm	0,002 mm
2054-300CIL	300x	0,2 mm	0,48mm	0,001 mm